Question: How Thick Should A Trailer Floor Be?

What do you paint a trailer floor with?

Tekton 64 Trailer Floor Coating is a water-based, plastic coating formulated to withstand abrasion in automotive, industrial and agricultural environments.

Excellent adhesion on metals, wood, concrete, and painted surfaces.

It offers a textured slip-resistant finish in either black (satin finish) or grey..

What causes soft floors in mobile homes?

Mobile Home Floor Problems. Soft spots are less common in newer homes that have plywood or OSB (Oriented Strand Board) subfloors. … They occur when the subfloor gets wet, causing the sub floor material to begin failing. They frequently occur in bathrooms, under flower pots, below windows, and behind washing machines.

How thick should a diamond plate be for a trailer?

If you don’t have a strong support on the bottom or you have beams, then you should go thicker. The most popular thicknesses would be 0.188″ (3/16″) or 0.125″ (1/8″), and even 0.25 (1/4″). So it all depends on the flooring you put down before. Always take that into consideration when determining the thickness you need.

What type of wood is best for a trailer floor?

Rough oak is our toughest flooring choice for our trailers. Rough oak is very durable and can take more abuse than pine and Douglas fir. It is the only flooring choice we recommend for steel tracked equipment. Blackwood is a very special lumber product that has a rubber insert infused throughout the top of the board.

How do you protect a wooden floor trailer?

Apply polyurethane wood varnish to seal and protect the floorboards from cracking, warping and drying. Evenly varnish the wood with a painter’s rag or foam applicator brush. Allow it to cure overnight, then sand the coat with the 280-grit sponge.

What type of wood is used on trailers?

In the open-top and livestock trailer industries, the most common decking options are southern yellow pine (treated and untreated), rough oak and Douglas fir. Each option comes with its pros and cons and knowing the differences is vital for choosing the best product for your trailer.

How much weight can a mobile home floor support?

You can have an AVERAGE of 40 pounds (live weight) per sq foot. So your answer depends on how much other live weight you add to the floor system. An upright piano weight is about 450 pounds.

What type of plywood is used for trailer floors?

Metsä Wood plywood for trailer flooring​Product pageDatasheet (PDF)​​Birch XL & KingSize – large plywood sheets​Birch XL & KingSize​Integra – coated plywood​Integra​Spruce Flex – high quality spruce plywoodSpruce ​Flex​Tuff MD – plastic coated plywood for flooring​Tuff MD5 more rows

How do you protect a trailer floor?

To protect the trailer floor at the underside, hardwood laminated floors are available with a black undercoating applied to the bottom side of boards. Undercoating is a thin layer of latex paint that helps to avoid direct contact between water and wood surface.

What is marine grade plywood?

Marine-grade plywood is a sturdier, higher-quality material made of Western Larch or Douglas-fir that is not treated with chemicals. This type of wood’s thin sheets of veneer (plies) are usually set up perpendicularly as part of a process called cross-lamination that helps strengthen the material.

How thick is the subfloor in a mobile home?

Most subfloors are either 3/4″ or 5/8″ thick. You will use the measurement to set your circular saw to the proper height. One of the most tedious parts of replacing subflooring in mobile homes is the removal of the original sub-flooring.

What is the best plywood for a trailer?

Exterior grade plywood or pressure treated wood will serve you the best in the long run. I’ve built restored and repaired, my share of trailers through the years.

What is the best flooring for mobile homes?

Floating floors are ideal for Mobile Homes for two reasons. 1st, The base sub-floor of these homes are prone to movement or future sagging. The advantages of installing floating floors, such as engineered wood or laminates is that it’s not attached to the sub-floor.

What is the best wood for a flatbed truck?

The answer is Apitong also known as Keruing. Apitong / Keruing is used by all major flatbed trailer manufactures like Great Dane, Fontaine, Wilson, Transcraft, MAC, Wabash, Doonan Specialized Trailer, XL-Specialized and more. They are the professionals and they know what is best. They all choose Apitong / Keruing.

How do I protect my utility trailer from elements?

Use grease or lubricant to coat all moving parts, such as the trailer hitch and hinges, especially if you store your open trailer outdoors. This will protect these parts from moisture—and therefore rust and corrosion—so your trailer is ready to roll when it emerges from storage. Give the wheel bearings a spin.

What should I coat my enclosed trailer floor with?

I would check with your local paint store about a two part epoxy that will work over wood. First coat will soak in and seal it up, wait 24 hours and apply a second coat. Two component stuff is great, super durable. I bought a enclosed trailer that had bedliner material sprayed throughout on the floor and ramp door.

What should I put on my enclosed trailer floor?

After vinyl rolls, soft plastic tiles are the next best option for a durable trailer floor….Pros of Soft PVC Tiles as Trailer FlooringDurable: Vinyl holds up well to stains, dirt, and heavy use.Sound and warmth: Soft PVC tiles are quieter and warmer than hard plastic tiles.More items…